10-minute Engine Flush High Traffic
SKU: Ln1009
HS Code: 3811290000
10-minute engine flush HIGH TRAFFIC reduces the car operation negative impact in the urban cycle. It guarantees the cyclical lubrication of the motor, prevents the piston rings from coking and removes all types of dust accumulations in the oil system.
Recommended for oil system cleaning of petrol and diesel engines that are operated in high urban traffic conditions and when the period of oil change is exceeded.
- Due to the increased amount of uncoking agents, it prevents piston ring cocking in rough operating conditions
- Effectively and safely removes decomposition products of oil and engine wear, does not clog the sump and oil system tubes
- Increases the service life of new oil by 10-20% by significantly reducing undrainable residue in the system by more than 2 times
- Prevents hydraulic adjuster and hydraulic tensioner sticking
Completely safe for rubber insulation, stuffing box, sealing rings and is fully compatible with all types of motor oils.
It is recommended to use before every oil change, after decoking, and when switching to a different oil type.
- Preheat the engine up to operating temperature and turn it off.
- Pour the product into the oil filler and start the engine.
- Let the engine run at idle for 10 minutes.
DRIVING IS PROHIBITED!
- Turn off the engine and drain the spent oil.
- Replace the oil filter and pour in new oil.
One package of the product is for 4 – 5-liter oil system.
