10-minute Engine Flush Power Safe
SKU: Ln1008
HS Code: 3811290000
The flush POWER SAFE is designed speciffficaly for gentle cleaning of high-mileage motor lubrication systems. It contains a high concetration of cleaning and protective additives and removes most of the deposits after the first application.
Recommended for cleaning oil systems of petrol and diesel engines with high mileage when switching to a different oil type, as well as when the oil change period is exceeded.
- A special formula for engines with high mileage allows to remove most of the strongest varnish and sludge deposits
- Effectively and safely removes decomposition products of oil and engine wear, does not clog the sump and oil system tubes
- Increases the service life of new oil by 10 – 20% by significantly reducing undrainable residue in the system by more than 2 times
- Penetrates the most inaccessible places and cleans all internal hydraulic drives in the engine
- The compound contains high concentration of cleaning and extreme pressure additives.
It is recommended to use before every oil change, after decoking, and when switching to a different oil type.
- Preheat the engine up to operating temperature and turn it off.
- Pour the product into the oil filler and start the engine.
- Let the engine run at idle for 10 minutes.
DRIVING IS PROHIBITED!
- Turn off the engine and drain the spent oil.
- Replace the oil filter and pour in new oil.
One package of the product is for 4 – 5-liter oil system.
