Antibacterial Foam Air Conditioner Cleaner
We recommend using firstly Ln1750 Antibacterial Foam Air Conditioner Cleaner to clean the air conditioning system. And after some time later (7-10 days) our product 1460 Air Conditioner Cleaner Disinfectant for prevention of pollution and bacteria, as well as to disinfection.
- Quickly copes with mold, fungi and bacteria, prevents the risk of developing allergies and respiratory diseases
- Eliminates rotten smell during air conditioner operation
- Prevents the accumulation and reproduction of harmful microorganisms on the surface of the evaporator
- Has voluminous and dense foam
- Has a fresh scent of menthol and eucalyptus.
Shake well before use!
IT IS PROHIBITED TO STAY IN THE CAR WHILE THE PRODUCT IS BEING USED
- Find the drain pipe to drain the condensate from the air conditioner.
- Insert the extension hose into the drain tube as far as it will go.
- While holding the can in a vertical position, press the valve and release all the foam from the can, gradually removing the hose.
- Remove the extension hose from the drain tube and place a container under it to drain the dirt. While the foam is acting, the liquid will flow out of the evaporator into the container.
- Start the engine and turn on the air conditioning and recirculation mode, setting the airflow intensity to the “maximum” position.
- Let the conditioning run for 10 minutes with the doors closed.
- Then ventilate the interior.
Application is carried out through a drainage tube. As a rule, it is located at the feet of the driver or passenger, it can also be accessed from the bottom of the car, this will require an inspection hole or a lift. Rarely, when the drainage tube goes into the engine compartment. To find the drain tube, you must use the car repair manual.
Before the procedure, it is necessary to clean the drainage of the air conditioner from clogged dirt if it is found.
It is recommended to remove the cabin filter and replace it with a new one.
If you have access to the evaporator through the access hole to replace the cabin filter, apply the cleaner directly to the evaporator.
Do not turn on the blower until all the liquid flows out through the drain tube, otherwise the foam that has not settled through the air ducts will enter the car interior.
